METALLIC AGRICULTURAL SPRAYER, VYR-60, SECTORAL, 3/4", MALE THREAD, MEDIUM FLOW.

METALLIC AGRICULTURAL SPRAYER, VYR-60, SECTORAL, 3/4", MALE THREAD, MEDIUM FLOW.

The VYR-60 is a sectoral agricultural sprinkler, made of brass and that has two connection references 3/4" male and female.

Its axis and springs are made of stainless steel, and its O-rings and washers are made of stainless steel, Teflon and special plastics to resist contact with the most aggressive fertilizers on the market.

This sprinkler is designed to work under flow ranges between 800 and 3270 l/h, at a nominal pressure between 1.75 and 5 BAR and with a coverage range between 12 and 19 meters in diameter.

The VYR-60 sprinkler can work with one or two nozzles; the main nozzle has a 24º degree inclination with respect to the horizontal plane and the secondary one 12º.

Its average rotation time is approximately 30 seconds. /360 (3 BAR, 4.40x2, 40mm).

For an optimal Uniformity Coefficient, our technicians recommend the use of this sprinkler with a spacing between heads and lines of 8x8 meters, up to 16x16 meters for rectangular frames, and from 8x8 meters up to 19x19 meters for triangular frames.

The most common use given to this agricultural sprinkler is the irrigation of cereals, alfalfa, beets, robust leafy vegetables, legumes and tubers.

SPECIFICATIONS:

Range: 12-19 meters.

Flow: 800 - 3,270 liters / hour.

Working pressure: 1.75 - 5 BAR.

Sector: Sectoral or circular.

Nozzles: A long-range main and a short-range secondary deflector.

Trajectory angles: 24º and 12º.

Maximum jet height: 3.8 meters.

Rotation time: Depending on the pressure and nozzles it is uniform and continuous.

Uniformity coefficient greater than 90% in 15x18R, 18x18T, 18x20T frames.

CHARACTERISTICS:

Medium flow agricultural sector impact sprinkler.

3/4" male or female connection.

Made of brass and stainless steel.

High strength rotation joints.

Nozzle angles of 24º and 12º.

Sectoral mechanical system through omegas very easy and quick to adjust.

Used in hedge irrigation with medium flow rates to cover the hedge frames on the sides and corners.

Great mechanical and hydraulic design that provides us with very significant energy savings and an optimal coverage coefficient in its distribution.

APPLICATIONS:

Horticultural plantations, cereals, tuberculosis, legumes, and fruit trees.