Submersible pumps find many uses, single stage pumps are used for drainage, sewage pumping, general industrial pumping and pumping of the mixture. Submersible pumps are typically located at the bottom of fuel tanks and are also used for the extraction of water from water wells.
Submersible pumps are also used in fuel tanks. By increasing the pre...
Submersible pumps find many uses, single stage pumps are used for drainage, sewage pumping, general industrial pumping and pumping of the mixture. Submersible pumps are typically located at the bottom of fuel tanks and are also used for the extraction of water from water wells.
Submersible pumps are also used in fuel tanks. By increasing the pressure at the bottom of the reservoir, the liquid can be raised more easily than by sucking it (suction) from above. The most advanced models include a water / oil separator that allows to re-inject it into the reservoir without having to raise it to the surface.
This special pump model is very similar to the deep well submersible pump, but with the difference that it is intended for applications that require a low lifting height and basically consists of a vertically mounted single-cell centrifugal pump directly attached to an electric motor . It was first used during World War II for military purposes, but in the last fifteen years or so it has perfected to become a direct competitor to the typical centrifugal pump or diaphragm pump sets with circuit breakers powered by diesel or diesel engines. gasoline (motor pumps).
CYLINDER PUMPS There are 28 products.
BILGE PUMP, DHT100, THREE-PHASE, 400V, PENTAX BILGE PUMP, DHT100,...
Submersible pump for dewatering clean and dirty water with cast iron pump body and brass impeller. 1.2CV at 400V triphasic. 1 1/4" connection. Submersible pump for dewatering clean and dirty water with cast iron pump body and brass...
432,1740€Online onlyON REQUEST (2 - 5 DAYS)BILGE PUMP, KONA 400 PM, 230V, 400W, ESPA BILGE PUMP, KONA 400 PM,...
BILGE PUMP, KONA 400 PM, ESPA WEIGHT 4.5 KILOS PLASTIC PUMP BODY SINGLE-PHASE MOTOR, 230 V MAXIMUM LIFTING HEIGHT, 8 METERS MAXIMUM DIAMETER OF PASSAGE OF SOLIDS, 5mm MAXIMUM IMMERSION, 7 METERS MAXIMUM FLOW AT 2 METERS, 7000 LITERS HOUR BILGE PUMP, KONA 400 PM, ESPA WEIGHT 4.5 KILOS PLASTIC PUMP BODY SINGLE-PHASE MOTOR, 230 V...
82,8650€Online onlyAVAILABLEBILGE PUMP, XTRA+, FLUQWATER, 750W, 230V, CLEAN WATER BILGE PUMP, XTRA+,...
Clear water bilge pump for garden irrigation, bilge and emptying of tanks and reservoirs. Fluqwater brand, XTRA+ model. Manufactured with delivery body and casing in stainless steel. 750W power, 5 mm solid pitch and 1 1/2" connection. Clear water bilge pump for garden irrigation, bilge and emptying of tanks and reservoirs....
128,3713€Online onlyAVAILABLEPUMP FOR BILGE, DP60M, PENTAX, WITHOUT LEVEL SWITCH. PUMP FOR BILGE, DP60M,...
PUMP FOR BILGE, DP60M, PENTAX, WITHOUT LEVEL SWITCH. PUMP FOR BILGE, DP60M, PENTAX, WITHOUT LEVEL SWITCH.
174,7426€Online onlyAVAILABLEBILGE PUMP, DP60MG, PENTAX, WITH LEVEL SWITCH BILGE PUMP, DP60MG, PENTAX,...
BILGE PUMP, DP60MG, PENTAX, WITH LEVEL SWITCH BILGE PUMP, DP60MG, PENTAX, WITH LEVEL SWITCH
181,9963€Online onlyAVAILABLEBILGE PUMP, LAGO 300 GI-LS, EBARA BILGE PUMP, LAGO 300 GI-LS,...
BILGE PUMP, LAGO 300 GI-LS, EBARA BILGE PUMP, LAGO 300 GI-LS, EBARA
227,5741€Online onlyON REQUEST ( 2 - 5 DAYS )
Wishlist
Información
New products
-
FLANGE, D-125mm, PVC PRESSURE, PN10, FOR SLEEVE, FLANGE HOLDER, PVC, CEPEX, 02039
FLANGE, PVC PRESSURE, D-125 mm, PN10, FOR SLEEVE, FLANGE HOLDER, PVC,...
13,7076€ -
MALE, REDUCED, 4" – 3”, MALE THREAD, PVC PRESSURE, PN10, 02324, CEPEX
MALE, REDUCED, 4" – 3", MALE THREAD, PVC PRESSURE, PN10, 02324, CEPEX
12,8795€ -
MALE, REDUCED, 3" – 2”, MALE THREAD, PVC PRESSURE, PN10, 02322, CEPEX
MALE, REDUCED, 3" – 2", MALE THREAD, PVC PRESSURE, PN10, 02322, CEPEX
5,5935€ -
MALE, REDUCED, 3" – 1,1/2”, MALE THREAD, PVC PRESSURE, PN10, 02323, CEPEX
MALE, REDUCED, 3" – 1,1/2", MALE THREAD, PVC PRESSURE, PN10, 02323, CEPEX
5,5935€ -
MALE, REDUCED, 3" – 2,1/2”, MALE THREAD, PVC PRESSURE, PN10, 02321, CEPEX
MALE, REDUCED, 3" – 2,1/2", MALE THREAD, PVC PRESSURE, PN10, 02321, CEPEX
5,5935€ -
MALE, REDUCED, 2,1/2" – 1,1/4”, MALE THREAD, PVC PRESSURE, PN10, 02320, CEPEX
MALE, REDUCED, 2,1/2" – 1,1/4", MALE THREAD, PVC PRESSURE, PN10, 02320,...
3,4689€ -
MALE, REDUCED, 2,1/2" – 1,1/2”, MALE THREAD, PVC PRESSURE, PN10, 02319, CEPEX
MALE, REDUCED, 2,1/2" – 1,1/2", MALE THREAD, PVC PRESSURE, PN10, 02319,...
3,4689€ -
MALE, REDUCED, 2,1/2" – 2”, MALE THREAD, PVC PRESSURE, PN10, 02318, CEPEX
MALE, REDUCED, 2,1/2" – 2", MALE THREAD, PVC PRESSURE, PN10, 02318, CEPEX
3,4689€
Specials
Our stores
