SOFTENER, LOW CONSUMPTION, STYLO 15 LITERS

The STYLO softener has been designed for the modern home, to complement our busy lifestyles and offer plenty of softened water to meet the demands of today's modern life.

Completely automatic and very easy to install, the STYLO softener works with a statistical volume and with proportional regeneration to optimize the consumption of water and salt. All standard connection elements and a hardness test kit included

• Small space
• Rotary valve, with fewer moving parts for greater reliability.
• Adequate flow for use in installations of all kinds.
• Easy-to-read backlit screen.
• Backup memory that allows the STYLO to restore all key parameters after a temporary power failure (Up to 72 hours).
• Electronic low voltage control system for greater safety
• High quality resin for food use to produce copious amounts of softened water.
• Proportional suction technology that reduces water and salt consumption with maximum efficiency.
• Statistical volumetric regeneration that takes into account the daily consumption of softened water, based on the daily average of this consumption.
• Statistical regeneration, the softener automatically calculates the ideal moment to carry out a regeneration.
• Manufactured and designed to comply with the latest EU regulations for performance tests on water softeners.
• Conforms to EN 14743:2007-09

Technical data

Model STYLO 15 STYLO 25

Nominal flow according to EN 14743 l/h 1,560.00 1,680.00

Maximum flow l/h 3,000.00 3,000.00

Minimum flow l/h 600.00 600.00

Nominal Pressure (PN) bar 4.00 4.00

Pressure limits EU (min./max.) bar 1.8/8.0 1.8/8.1

Minimum pressure at nominal flow according to EN 14743 bar 1.00 1.00

Connections ( Inlet Outlet ) BSP 3/4 " 3/4 "

Connection height mm mm 473 675

(H) Height mm 602 804

(W) Width mm 270 270

(D) Depth mm 480 480

Weight without load Kg 22 35

Weight in service approx. kg 50 70

Exchange capacity EN 14743 m3 x °fH 77 134

Exchange capacity EN 14743 m3 x °dH 43 75

Nominal capacity in (ppm mg CaCO /l) / (mmol/l)3 ppm / mmol/l 770/7.7 1340/13.4

Salt capacity in the tank Kg 16 24

Amount of ion exchange resin l 15 25

Salt consumption for maximum regeneration Kg 2 3

Salt consumption for minimum regeneration Kg 1.4 1.8

Water consumption for maximum regeneration l 105 145

Protection class I IP 51 51

Water temperature (min./max.) °C 5/30 5/30

Ambient temperature (min./max.) °C 5/40 5/40

Electrical connection V / Hz 230 / 50 230 / 50

Power consumption W 15 15