SALICLOR SALINE CHLORINATOR, TEAP, L-120, 32 GR/HOUR, +PH, +REDOX

Power supply (AC) 100-120 Vac 3.2A / 200-240 Vac. 1.6A
Mains frequency 50/60 Hz
Input cable H07V/K – 3 x 1 mm2
Cell cable H07V/K – 2 x 6 mm2 under rubber

Microprocessor production control.
Salinity of the water. 5 to 7 gr/lt.
Self-cleaning method Electronic polarity reversal.
Electrodes Titanium expanded mesh plate with Ru/Ir coating.
Maximum cell pressure 7 kg/cm2
8.5mm thick SAM cell material.
Cell connection Glued at 50 mm and/or 63 mm.
Control unit measurements. 310 x 218 x 75mm.

Salichlor L-120 working conditions

Pool volume 120 m3 max.
Production 32 gr/h.
Output 5V/20Amp
Fuse 2 Amp.
electrodes. 4
Consumption 150 W.

pH CHARACTERISTICS

Measurement range: 0-10
Control range 6.5 – 9
Digital calibration 1 adjustment point at pH 7
Electronic calibration 2 adjustment points at pH 4 and 7
Peristaltic dosing pump with fixed flow rate of 1.5 l/hour, 1 Bar and tube of
Santoprene.
Double confluence probe and 2 meters of cable with BNC connection. With scale 0-14 and range of +- 20mv. Epoxy body.
Probe holder Connector with 1⁄2" thread in Nylon and aluminum.

CHARACTERISTICS Redox/ORP

Measurement range: 90 – 900 millivolts
Control Range: 90 – 900 millivolts
Gold filament probe and 5 meters of cable with connection
BNC. With scale 0-1,900 and range of +- 2mv. Epoxy body.
Probe holder Connector with 1⁄2" thread in Nylon and aluminum.