STATIC PRESSURE REGULATOR 1/2" R/F, 7 BIS

STATIC PRESSURE REGULATORS
Pressure regulating valves with pressure maintenance at flow rate “0” (static). Valves body in bronze, cover in brass, spring in anti-corrosion treated steel, membrane in NBR reinforced with Polyamide.
• Valve for maximum outlet pressure in BIS 10 series of 7.5 Atm and 6 Atm in 7 BIS.
• Pressure gauge connection or ¼” purge. It complies with the EN1567 Standard and is valid for installations of drinking water, air, neutral gas and domestic diesel. The 7 bis series comes factory pre-set at 3 Atm.
• It is important to calibrate the outlet pressure with the valves without flow passage, that is, with the valve after the regulator closed.

• It is recommended to install a filter before the pressure regulator (water
above), this will prevent the passage of particles that can erode the closure of the
valve.
• Minimum temperature -10ºC and maximum continuous temperature of 80ºC